Gate Drivers and NexFET Power Blocks deliver 700 W of power
更新時間: 2020-01-17 12:23:45
Designers can double the power density in space-constrained motor drives.
Texas Instruments (TI) (NASDAQ:TXN) today introduced two new device families that help reduce size and weight in motor drive applications. When used together, DRV832x brushless DC (BLDC) gate drivers and CSD88584/99 NexFET™ Power Blocks require as little as 511 mm², half the board space of competing solutions.
The DRV832x BLDC gate drivers feature a smart gate-drive architecture that eliminates up to 24 components traditionally used to set the gate drive current while enabling designers to easily adjust field-effect transistor (FET) switching to optimize power loss and electromagnetic compliance. The CSD88584Q5DC and CSD88599Q5DC power blocks leverage two FETs in a unique stacked-die configuration, which doubles power density and minimizes the FET resistance and parasitic inductances typically found in side-by-side FET configurations.
Benefits of using a CSD88584/99 and DRV832x device together
- Maximum power density: The combined solution delivers 700 W of motor power without a heat sink, providing 50 percent higher current than conventional solutions without increasing the footprint.
- High peak current: As demonstrated by the 18-volt BLDC reference design, the smart gate driver and power block are capable of driving a peak current of up to 160 A for more than 1 second.
- Optimal system protection: The combination enables shorter trace lengths and actively prevents unintended FET turn-on, while also providing undervoltage, overcurrent and thermal protection.
- Superior thermal performance: The CSD88584Q5DC and CSD88599Q5DC power blocks come in TI's DualCool™ thermally enhanced package, which enables designers to apply a heat sink to the top of the device to decrease thermal impedance and increase the amount of power dissipated to maintain safe operating temperatures for the board and end application.
- Clean switching: The power blocks' switch-node clip helps eliminate parasitic inductance between high- and low-side FETs. Additionally, the DRV832x gate driver's passive component integration minimizes board traces.
Tools and support to jump-start design
In addition to the 18-volt BLDC motor reference design, engineers can search for other motor reference designs that use the power blocks and gate drivers to help solve their system design challenges. The three-phase smart gate-driver evaluation module (EVM) allows designers to drive a 15-A, three-phase BLDC motor using the DRV8323R gate driver, CSD88599Q5DC power block and MSP430F5529 microcontroller LaunchPad™ development kit. The EVM is available from the TI store for US$99.00.
Package, availability and pricing
The new DRV832x BLDC smart gate drivers offer peripheral and interface options for engineers to select the best device for their design: with or without an integrated buck regulator or three integrated current-shunt amplifiers. Each device option is available in a hardware or serial interface and comes in quad flat no-lead (QFN) packaging. The CSD88584/99 power blocks come in DualCool small outline no-lead (SON) packaging, with 40- or 60-V breakdown voltage (BVDSS) choices. All devices are available now, priced and packaged as listed in the table below.
Product Price U.S. dollars for 1,000-unit quantities Package size Key features
DRV8320 $1.41 5-mm-by-5-mm Smart gate drive
DRV8320R $2.01 6-mm-by-6-mm Integrated buck regulator
DRV8323 $1.60 6-mm-by-6-mm Integrated current-shunt amplifiers
DRV8323R $2.19 7-mm-by-7-mm Integrated buck regulator and current-shunt
CSD88584Q5DC $2.24 5-mm-by-6-mm 40-V BVDSS, 0.68-mΩ typical on-resistance
CSD88599Q5DC $2.50 5-mm-by-6-mm 60-V BVDSS, 1.7-mΩ typical on-resistance
Voltage Level Translator 8-CH Bidirectio >
Automotive 12-Bit 3.3kSPS 4-Ch Delta-Sig >
Super Speed Host Controller USB 3.0 3.3V >
2-A DUAL NON-SYNCHRONOUS CONVERTER WITH >
4.5V to 18V Input, 2A Synchronous Step D >
Low Dropout Controllers - LDO 150-mA LDO >
Low Dropout Regulators - LDO 300MA,LOW I >
ADJUSTABLE AND FIXED LOW-DROPOUT VOLTAGE >
LOW-DROPOUT VOLTAGE REGULATORS,Low Dropo >