画像は参考用です。製品仕様を参照してください。
4G bit Nand Flash Pb free SLC
メーカー : | Micron Semiconductor Products Inc |
---|---|
パッケージ : | 48-TFSOP (0.724, 18.40mm Width) |
製品 : | NAND Flash |
Datasheet: | MT29F4G08ABADAWP-AITX:D Datasheet (PDF) |
RoHs Status: | Lead free / RoHS Compliant |
在庫: | 9 |
量
お問い合わせ
MT29F4G08ABADAWP-AITX:D 製品詳細
Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection and monitor device status (R/B#).
This hardware interface creates a low pin-count device with a standard pinout that remains the same from one density to another, enabling future upgrades to higher densi ties with no board redesign.
A target is the unit of memory accessed by a chip enable signal. A target contains one or more NAND Flash die. A NAND Flash die is the minimum unit that can independently execute commands and report status. A NAND Flash die, in the ONFI specification, is referred to as a logical unit (LUN). There is at least one NAND Flash die per chip enable signal. For further details, see Device and Array Organization.
This device has an internal 4-bit ECC that can be enabled using the GET/SET features.
See Internal ECC and Spare Area Mapping for ECC for more information.
アプリケーション/パラメータの範囲
• Open NAND Flash Interface (ONFI) 1.0-compliant1
• Single-level cell (SLC) technology
• Organization
– Page size x8: 2112 bytes (2048 + 64 bytes)
– Page size x16: 1056 words (1024 + 32 words)
– Block size: 64 pages (128K + 4K bytes)
– Plane size: 2 planes x 2048 blocks per plane
– Device size: 4Gb: 4096 blocks; 8Gb: 8192 blocks 16Gb: 16,384 blocks
• Asynchronous I/O performance
– tRC/tWC: 20ns (3.3V), 25ns (1.8V)
• Array performance
– Read page: 25µs 3
– Program page: 200µs (TYP: 1.8V, 3.3V)3
– Erase block: 700µs (TYP)
• Command set: ONFI NAND Flash Protocol
• Advanced command set
– Program page cache mode4
– Read page cache mode 4
– One-time programmable (OTP) mode
– Two-plane commands 4
– Interleaved die (LUN) operations
– Read unique ID
– Block lock (1.8V only)
– Internal data move
• Operation status byte provides software method for detecting
– Operation completion
– Pass/fail condition
– Write-protect status
• Ready/Busy# (R/B#) signal provides a hardware method of detecting operation completion
• WP# signal: Write protect entire device
• First block (block address 00h) is valid when ship ped from factory with ECC. For minimum required ECC, see Error Management.
• Block 0 requires 1-bit ECC if PROGRAM/ERASE cycles are less than 1000
• RESET (FFh) required as first command after power-on
• Alternate method of device initialization (Nand_In it) after power up (contact factory)
• Internal data move operations supported within the plane from which data is read
• Quality and reliability
– Data retention: 10 years
– Endurance: 100,000 PROGRAM/ERASE cycles
• Operating voltage range
– VCC: 2.7–3.6V
– VCC: 1.7–1.95V
• Operating temperature:
– Commercial: 0°C to +70°C
– Industrial (IT): –40ºC to +85ºC
• Package
– 48-pin TSOP type 1, CPL2
– 63-ball VFBGA
技術的パラメータ
- Memory Type
- Non-Volatile
- Memory Format
- FLASH
- Technology
- FLASH - NAND
- Memory Size
- 4Gb (512M x 8)
- Memory Interface
- Parallel
- Voltage Supply
- 2.7V ~ 3.6V
- Operating Temperature
- -40??C ~ 85??C (TA)
- Mounting Type
- Surface Mount
- Package / Case
- 48-TFSOP (0.724, 18.40mm Width)
- Supplier Device Package
- 48-TSOP I
MT29F4G08ABADAWP-AITX:D 同等の部分
MT29F4G08ABADAWP-AITX:Dコンポーネントには、これらの交換部品や代替部品を検討することができます。
モデル | メーカー | パッケージ | 備考 |
---|---|---|---|
MT29F4G08ABADAWP-ITED |
MT29F4G08ABADAWP-AITX:D 特殊な製品に関連する
Ratings and Reviews (1)
- 5 / 5
- 5 Stars 100%
- 4 Stars 0%
- 3 Stars 0%
- 2 Stars 0%
- 1 Stars 0%
-
**arti***
TOP-supplier - jederzeit gerne wieder
- 運送:
運送 & 支払い
運送
- 交通手段
- 出荷
- 配信
- DHL
- $20.00-$40.00 (0.50 KG)
- 2-5 days
- Fedex
- $20.00-$40.00 (0.50 KG)
- 3-7 days
- UPS
- $20.00-$45.00 (0.50 KG)
- 2-5 days
- TNT
- $25.00-$65.00 (0.50 KG)
- 2-5 days
- EMS
- $25.00-$45.00 (0.50 KG)
- 5-14 days
- REGISTERED AIR MAIL
- $2.00-$3.00 (0.10 KG)
- 7-30 days
Processing Time:Shipping fee depend on different zone and country.
支払い
- お支払い方法
- 支払手数料
- Wire Transfer
- charge US$30.00 banking fee.
- Paypal
- charge 4.0% service fee.
- Credit Card
- charge 3.5% service fee.
- Western Union
- charge US$0.00 banking fee.
- Money Gram
- charge US$0.00 banking fee.
私たちは高品質の製品、思いやりのサービスと販売保証後を提供します
-
私たちは、豊かな製品を持って、あなたの様々なニーズを満たすことができます。
-
最小発注数量がの1pcsから始まります。
-
最低国際海運料金は$ 2.00米から始まります。
-
すべての製品の90日間の品質保証。
梱包
-
Step1: Products
-
Step2: Vacuum Packaging
-
Step3: Anti-Static Bag
-
Step4: Individual Packaging
-
Step5: Packaging Boxes
-
Step6: Bar-Code Shipping Tag
All the products will packing in anti-staticbag. Ship with ESD antistatic protection.
Outside ESD packing’s lable will use ourcompany’s information: Part Mumber, Brand and Quantity.
We will inspect all the goods before shipment,ensure all the products at good condition and ensure the parts are new originalmatch datasheet.
After all the goods are ensure no problems afterpacking, we will packing safely and send by global express. It exhibitsexcellent puncture and tear resistance along with good seal integrity.

保証
1.The electronic components you purchase include 365 Days Warranty, We guarantee product quality.
2.If some of the items you received aren't of perfect quality, we would resiponsibly arrange your refund or replacement. But the items must remain their orginal condition.
FAQ:
- Q: How does Jotrin guarantee that MT29F4G08ABADAWP-AITX:D is the original manufacturer or agent of MICRON?
- We have a professional business development department to strictly test and verify the qualifications of MICRON original manufacturers and agents. All MICRON suppliers must pass the qualification review before they can publish their MT29F4G08ABADAWP-AITX:D devices; we pay more attention to the channels and quality of MT29F4G08ABADAWP-AITX:D products than any other customer. We strictly implement supplier audits, so you can purchase with confidence.
- Q: How to find the detailed information of MT29F4G08ABADAWP-AITX:D chips? Including MICRON original factory information, NAND Flash application, MT29F4G08ABADAWP-AITX:D pictures?
- You can use Jotrin's intelligent search engine, or filter by NAND Flash ; SLC NAND category, or find it through Micron Semiconductor Products Inc Information page.
- Q: Are the MICRON's MT29F4G08ABADAWP-AITX:D price and stock displayed on the platform accurate?
- The MICRON's inventory fluctuates greatly and cannot be updated in time, it will be updated periodically within 24 hours. After submitting an order for MT29F4G08ABADAWP-AITX:D, it is recommended to confirm the order with Jotrin salesperson or online customer service before payment.
- Q: Can I place an order offline?
-
Yes. We accept offline orders.
We can provide order placement service. You only need to log in, click "My Orders" to enter the transaction management, and you will see the "Order Details" interface. After checking it, select all and click "Place Order". In addition, you can enjoy coupons or other selected gifts when placing orders online. - Q: What forms of payment can I use in Jotrin?
- TT Bank, Paypal, Credit Card, Western Union, and Escrow is all acceptable.
- Q: How is the shipping arranged and track my package?
-
Customers can choose industry-leading freight companies, including DHL, FedEx, UPS, TNT, and Registered Mail.
Once your order has been processed for shipment, our sales will send you an e-mail advising you of the shipping status and tracking number.
Note: It may take up to 24 hours before carriers will display tracking information. In normal conditions, Express delivery needs 3-5 days, Registered Mail needs 25-60 days. - Q: What is the process for returns or replacement of MT29F4G08ABADAWP-AITX:D?
-
All goods will implement Pre-Shipment Inspection (PSI), selected at random from all batches of your order to do a systematic inspection before arranging the shipment.
If there is something wrong with the MT29F4G08ABADAWPAITX:D we delivered, we will accept the replacement or return of the MT29F4G08ABADAWP-AITX:D only when all of the below conditions are fulfilled:
(1)Such as a deficiency in quantity, delivery of wrong items, and apparent external defects (breakage and rust, etc.), and we acknowledge such problems.
(2)We are informed of the defect described above within 90 days after the delivery of MT29F4G08ABADAWP-AITX:D.
(3)The MT29F4G08ABADAWP-AITX:D is unused and only in the original unpacked packaging.
Two processes to return the products:
(1)Inform us within 90 days
(2)Obtain Requesting Return Authorizations
More details about return electronic components please see our Return & Change Policy. - Q: How to contact us and get support, such as MT29F4G08ABADAWP-AITX:D datasheet pdf, MT29F4G08ABADAWP pin diagram?
- Need any After-Sales service, please feel free contact us: sales@jotrin.com
Micron Semiconductor Products Inc
- 1.Leading-edge Electronics add Soup to Drivers Through Wireless Networks.
- 2.Micron Introduces Monolithic Mobile Memory-LPDDR4x
- 3.Micron Broadens Storage Portfolio for Customers With New SAS Solid State Drive Family for Data-Intensive Applications
- 4.Micron Introduces Persistent Memory Solution That Combines DRAM Performance With NAND Flash Reliability to Address Big Data Challenges
- 5.Micron Releases Latest 5210 ION Series Enterprise SSD
- 6.Micro bit can be used to DIY smart small fans
-
MT28EW512ABA1HPC-0AAT 512MB Parallel NOR Flash
-
MT29F2G08ABAGAWP-ITE:G 2G bit Nand Flash SLC
-
MT29F1G08ABAFAWP-ITE:F 1Gb Nand Flash SLC
-
K9F4G08U0F-5CB0 4G bit Nand Flash 512Mx8 SLC
-
KVR800D2S6/1G DDR2 PC800 SO-DIMM 128Mx64
-
H9TP32A4GDCCPR-KGM 32G eMMC (eNAND)
国際認証
