2917 (7343 metric)
- 商品画像 & モデル
- 備考
- 単価
- 量
- 動作して
-
-
Tantalum Capacitors - Solid SMD 6.3v 470uF 20% Tol ESR = 30
-
1 + 10 + 25 + 50 + >=100 -
最小数 : 1 在庫 : 36300
-
-
Tantalum Capacitors - Solid SMD 6.3v 470uF 10% Tol ESR = 30
-
1 + 10 + 25 + 50 + >=100 -
最小数 : 1 在庫 : 576
-
-
Tantalum Capacitors - Solid SMD 10v330uF20% Tol ESR = 35
-
1 + 10 + 25 + 50 + >=100 -
最小数 : 1 在庫 : 36300
-
-
Tantalum Capacitors - Solid SMD 35v22uF20% Tol ESR = 100
-
1 + 10 + 25 + 50 + >=100 -
最小数 : 1 在庫 : 28000
-
-
Tantalum Capacitors - Solid SMD 35v22uF10% Tol ESR = 100
-
1 + 10 + 25 + 50 + >=100 -
最小数 : 1 在庫 : 28000
-
-
Tantalum Capacitors - Solid SMD 2.5v 1500uF 20% Tol ESR = 18
-
1 + 10 + 25 + 50 + >=100 -
最小数 : 1 在庫 : 28000
-
-
Tantalum Capacitors - Solid SMD 2.5v 1500uF 20% Tol ESR = 15
-
1 + 10 + 25 + 50 + >=100 -
最小数 : 1 在庫 : 28000
-
Q:What defines the physical structure of the 2917 (7343 metric) package?
A:Key features include:
- Leadless bottom-mounted pads: Ensures stable PCB attachment.
- Central thermal pad: ~80% coverage for efficient heat dissipation.
- 8-pin layout with dual-row configuration: Optimizes space and signal routing.
- Ultra-thin profile: 0.6 mm height for compact designs. -
Q:Why choose 2917 (7343 metric) over alternatives?
A:Critical advantages:
- Miniaturization: 30% smaller than SOP-8 packages.
- Thermal Performance: Direct PCB heat path reduces junction temperature by ~15%.
- Electrical Benefits: Low-inductance design (<1 nH) for high-frequency stability.
- Reliability: Moisture-resistant (MSL3-rated) substrate for harsh environments. -
Q:What are common technical specs?
A:Standard configurations (consult datasheets):
- Body Size: 7.3 mm × 4.3 mm
- Height: 0.6 mm
- Pin Pitch: 0.65 mm
- Material: Copper-alloy leads with Ni/Pd/Au plating
- Temp Range: -40°C to +125°C -
Q:Where is 2917 (7343 metric) typically applied?
A:Dominant use cases:
- Power Converters: e.g., DC-DC buck regulators (TPS62130).
- RF Modules: e.g., Bluetooth/Wi-Fi transceivers (CC2640).
- Sensor Interfaces: e.g., MEMS accelerometers (LIS2DH). -
Q:What are critical assembly guidelines?
A:Key recommendations:
- PCB Design: 4×4 thermal via array under central pad (0.3 mm diameter).
- Solder Paste: Type 4 solder recommended for fine-pitch printing.
- Reflow Profile: Peak temp ≤ 245°C (Pb-free process).
- Inspection: X-ray (AXI) mandatory for void detection (<15% tolerance).



すべてのカテゴリ